Things to Notice when Installing Sum Passenger Elevator:
1. When using the power tool, you must ensure reliable and effective grounding. And with leakage protection. The power tool must not be used in wet or water, and must not be used as a power tool for other purposes.
2. Elevator installation and out of the shaft should pay special attention to prevent the object fell to the injured.
3. Absolute work should be avoided at the same time on different floors in the hoistway.
4. Gas cutting equipment should be properly placed in a safe place, and there are "no smoking" signs and fire fighting measures and fire fighting tools. Oxygen cylinders and acetylene bottles storage distance of not less than 7 meters, and away from the fire at least 10 meters. When conducting welding or gas cutting work, should be in advance with the owner of the fire department to get in touch, apply for a fire license, the operator must have a license to operate, fire must have a guardian and equipped with fire extinguishers. To prevent the solution from splashing on clothes and skin.
5. When you put a brown rope, wire rope, cable, people can not drill in the middle.
6. In the car top work to be careful, pay attention to the surrounding situation, to prevent the sudden start of the elevator accident occurred, or people caught in the car and the car wall between the unfortunate.
7. Without qualified inspection and acceptance of qualified elevators, unrelated personnel shall not be free to start the elevator.
8. After the end of the day, you must check whether any personnel still remain in the hoistway, whether the tools and useless items are properly packed, check whether the electrical switch is off, whether the fire has been extinguished, and ensure that the fire protection equipment is in good condition.
9. Each site must have an emergency medicine box.