For many car mechanics, car lift is one of the most important pieces of equipment they will use on a day to day basis. They use this machinery to change car tyres and to inspect faults on vehicles that would come into their garage or workshop. There are many different ways you can use the car lift and all of these different methods will require the user to practice the utmost caution when using any type of vehicle lift.
When using car lift, please make sure that the car’s engine is off, the gear stick set to neutral and that you have secured the doors of the car. Fortunately for the mechanic, all car lifts should have security measures in place to make sure that the lifts lock into place in a safe manner. When using these lifts, always make certain that there are no minor movements made by the car and always check the sturdiness of the safety blocks on the lift so that everything is securely put in place.
After all the security checks have been put in place, you will now be in a position to raise the car above your head using the lift. Do this in a slow manner and continue to check the stability of the car and the lift in question. Also, another point to remember is that you should always slow the raising of the car when it reaches the peak of the car lift. Once the car has risen to the very top, it is now time to secure everything by locking it all in place.
When you get round to changing the car tyres when using a lift, many mechanics get scared due to the notion that the car will fall on top of them when they are doing the change. If you follow all the procedures mentioned above and in the safety manual, you should have no problems when doing any repairs.
One of the more common mistakes that has proved fatal in the past is loading the lift incorrectly. This can really be a cause of a number of different things. Things such as the load being too heavy, the load being too large or even that the load weight is not distributed correctly Again, always check the manufacturers guidelines before using the lift and you should not have any of these problems. Another point to remember is to never raise the load above the manufactures recommended level.More information, please visit: http://www.sumelevator.com